Underfloor Heating Pack Selector

Single Room or Zone

One room or zone packs are used where a single area is to be heated. They are available for rooms up to 100m2 and provided with one thermostat.

Multiple Heated Zones

Multiple room or zone packs are used where multiple areas are to be heated. They are available in 40-160m2 with 2-8 thermostats

Boiler

If the source of heat is a boiler the pack includes a control pack to blend the high temperature output down to a temperature suitable for underfloor heating

Heat Pump

Where a heat pump is the heat source the flow temperature is lower and a blending control pack isn’t required. This reduces the cost of the underfloor heating pack

HIU - Heat Interface Unit

A HIU such as the Wavin Calefa range, commonly have a temperature control which reduces the temperature to the heat system. This means a blending control pack isn’t required

Staples System

Staple systems offer a cost effective solution for screeded floors. Simply staple the pipe to the insulation panels before the screed is applied.

This option offers flexibility of design and is a great solution for installers who want to minimise cost and are comfortable in spacing and laying out pipework.

System Plates

System plates are plastic sheets with pre-formed grips to hold the pipe in position. These are laid on top of insulation panels and hold the pipe in place before the floor is screeded.

This solution allows fast installation and ensures even spacing of the pipe. The sheets can be cut to size with a utility knife and lock together to prevent any screed ingress under the plates. The sheets can support foot traffic, so will protect the pipe if other trades are on site.